BMW E60 E61 hidden menu – procedure
Turn the ignition on.
Press and hold trip reset button. Instrument cluster will show warning sign, next oil sign.
Release the button when FGSTNR appears on the display. After few seconds a 7-digit number will appear. Last 5 digits are also the end of your cars VIN.
Add up last 5 digits together (1+2+3+4+5=15).
Press and hold trip reset button until 01.__ is displayed, then immediately press trip reset button couple of times to navigate to position 19.__. “LOCK ON” will be displayed. After couple of seconds “CODE: 00” will appear.
Use trip reset button to enter your code (added up last 5 digits from 01.__ position).
Now the hidden menu is unlocked and you can browse all its tests.
BMW E60 E61 hidden menu description
01.__
01.00 – FGSTNR (vehicle identyfication number)
01.01 – K-ZAHL W/T
01.02 – BMWTNR
01.03 – COD DIA (diagnostic codes)
01.04 – KI HSTLDATUM
01.05 – HW AEI (hardware version)
01.06 – SW (software version)
01.07 – KODIERDATEN (coding date)
01.08 – CAN
02.__
02.00 – KI TEST (instrument cluster test)
03.__
03.00 – UNBELEGT (not used)
04.__
04.00 – VERM-MOM (current fuel consuption)
04.01 – VERM-MOM (current fuel consuption)
04.02 – D-VERB1 LIT (data used for calculating average fuel consumption)
04.03 – D-VERB1 WEG (data used for calculating average fuel consumption)
04.04 – D-VERB2 LIT (data used for calculating average fuel consumption)
04.05 – D-VERB2 WEG (data used for calculating average fuel consumption)
05.__
05.00 – RW-VERB (fuel consumpion used to calculating range)
05.01 – RW-MOM (calculated range)
06.__
06.00 – TANK L R S (fuel level readouts from left sensor, right sensor and estimated sum)
06.01 – TANK-ANZ PH
06.02 – TANK-ADC L R (raw data from fuel level sensors)
07.__
07.00 – KTMP-MOM (coolant temperature)
07.01 – ATMP-MOM (ambient air temperature, momentary)
07.02 – ATMP-ADC (ambient air temperature, average)
07.03 – N-MOT-MOM (engine speed)
07.04 – N-VWF-MOM (current start position of tachometer yellow field)
08.__
08.00 – V-EFF (real current speed)
08.01 – V-ANZ (fake current speed to be shown on the speedometer)
08.02 – V-SZ (target speed set by the cruise control)
08.03 – DGESCH1 WEG
08.04 – DGESCH1 ZEIT
08.05 – DGESCH2 WEG
08.06 – DGESCH2 ZEIT
09.__
09.00 – UB (battery voltage)
10.__
10.00 – KM / WOCHE
10.01 – GELB CBS H A
10.02 – SC-STATUS
10.03 – CBS-MODE
10.04 – TAG-ZAEHLER
11.__
11.00 – ZEIT-EINH (12h / 24h clock mode)
11.01 – WEG-EINH (distance and speed units)
11.02 – TEMP-EINH (tempretature units)
11.03 – VERB-EINH (fuel consuption units)
12.__
12.00 – V-ANKUNFT (average speed used for calculating ETA)
12.01 – ANK_ZEIT (ETA)
13.__
13.00 – AUDIO (instrument cluster speaker test)
14.__
14.00 –
14.01 – FSP01
14.02 – FSP02
14.03 – FSP03
14.04 – FSP04
14.05 – FSP05
14.06 – FSP06
14.07 – FSP07
14.08 – FSP08
14.09 – FSP09
14.10 – FSP10
15.__
15.00 – PORT 00h
15.01 – PORT 01h
15.02 – PORT 02h
15.03 – PORT 03h
15.04 – PORT 04h
15.05 – PORT 05h
15.06 – PORT 06h
15.07 – PORT 07h
15.08 – PORT 08h
15.09 – PORT 09h
15.10 – PORT 0Ah
15.11 – PORT 0Bh
16.__
16.00 – DIMMRAD-CAN
16.01 – PHOTO-ADC
16.02 – DIMM-PWM S Z
16.03 – DIMM-PWM D K
17.__
17.00 – DISP-HEIZ
17.01 – NTC1 NTC2
17.02 – KONTR-PWM
18.__
18.00 – CC-TEST? (warning lights test)
19.__
LOCK (hidden menu lock)
20.__
20.00 – KORR-VERBR (fuel consumption correction factor)
20.01 – 1er KORR (add 1 to correction factor)
20.02 – 10er KORR (add 10 to correction factor)
20.03 – 100er KORR (add 100 to correction factor)
21.__
21.00 – RESET? (resets date, time and trip computer memory)